Can this be used in a campervan on a 12 volt system

Unfortunately not due to the LED strip being 24V.

Looking at the power consumption of 10w per metre and the 150W power supply, is there an option to use a smaller powered PSU if you are only using one strip ?

It depends on the length of the strip.

Good morning .is cool white an option instead of warm white.ta

Unfortunately not, at this present time it only comes in warm white.

Hi Does the blaq aura come in a rbg or rgbw ?

Unfortunately the Blaq Aura only comes in warm white at this present time.

My width between the slats is 15mm. Can the Light Strip be used with that or will it not hold and fall down?

Yes it will fit and stay in place if you use some CT1 adhesive.

Hi, What colour is the light? Warm or cold?

Hi.

The Blaq Aura is a warm white light.

How long is each strip in a kit: and how many strips in a kit cost for each it

Hi,

Each strip in each kit is 3m long with a 2m cable tail and you start with a starter kit (includes 1 strip) which costs £119.99, and then you can add up to 3 add on kits (each having 1 strip in each kit) at a cost of £57.17 each.

Hi. Can I wire these strips into a zigibee controller if I hardwire directly into the controller. Thanks

Hi

Yes you could do this.  The kit comes with  wifi controller so you would need to also purchase the zigbee Controller

Hi, will the remote control still pick up the receiver if it is installed in the loft and the lights are in the bedroom below

Hi,

Yes that will work perfectly fine.

Do you do an LED strip that changes colour in this product?

Hi,

Unfortunately not,  at this present time we only do the warm white.

Will there be cool white available at some point

Hi,

At this present moment we have no plans to get this in any other colours. However if enough people request this we will of course do what we can to produce this in the future.

Hi length of cable from the led lights to 4 way splitter, is this cable thin so it can go behind panels as I don’t want any wires on show. Thanks

Hi,

the cable length is 2m, It is 0.75mm 2 core cable so is thin.

Hi how long is the cable between the Blaq Aura led light which connects to the 4way splitter ?

Hi,

The cable that comes from the LED is 2m long.  I hope this helps.

Hi do these have an option of cool white led

Hi,

Unfortunately not, at this present time they only come in the warm white.

I only need 2 meter length. Price but 4 of them Can the bits you cut off be reused

Hi,

Each length is designed to simply be cut to size and the offcut disposed of, there is no way to use the offcuts.

Do you deliver in the Netherlands?

Hi,

We do not ship to the Netherlands currently, however you are more than welcome to place an order if you are happy to arrange your own courier to pick the items up from us.

If you are happy to do this, we can supply you with the dimensions and weight of your order after it has been packaged.

Hello, we can re-use the cutting led strip to put a new plug? Thanks!

Hi

Unfortunately not, once cut the leftover needs to be disposed of.

Can I buy them with a EU power plug?

Hi

You can't buy them from us with an EU plug but you could cut the plug that is on them off and fit your own or use an adaptor.

Hi, just looking at product code BLAQ-AURA-SP , can you advise the length of the cable from the LED strip lights to the 4 way splitter

Hi,

I can confirm that the cable from the LED strip is 2m long.

Hi I was wondering can I stick the strips with TEC 7 as the slat wall is 2mm wider in the grooves ' I have tried double sided stick foam adhesive tape and it still pops out here and there . The product is excellent and we are really happy with the look it gives our slat panels . Any info would be great ' Thanks again . kind regards Andrew Grant.

Hi

Technically it should be fine, but we haven't tested this particular adhesive.  We would always recommend CT1.

Do you do Blaq aura in cool white?

Hi,

Unfortunately not, at this present time we only have it in warm white.

Hello, will the lights fit the Acupanel non-acoustic range. Thanks Allan

Hi

The Non acoustic panels are a lot thinner than the standard Acupanel range, unfortunately the Blaq Aura will not fit these panels

Hello, I am interested in your blaq Aura starter kit. I have a half-wall slat wall installation which is 1 meter high and want to know that if I cut the blaq Aura strip into 3, can I use all 3 to connect to the spitter? Do I need connectors and extra wiring for the two pieces that do not have the wiring attached? As a second question, is there an option to use a different power supply as the one supplied appears too big to hide behind my skirting? What are the dimensions of the power supply? Thank you

HI

Unfortunately this strip is single use and once cut the remainder will need to be disposed of,  so to achieve what you are looking at you would need 1 starter kit and 3 add ons.

If you cut down the strip can the cut section be used

Hi,

Unfortunately not, it has to be disposed of.

Hi are you able to tell me how long the wire is between the light strip and four way connector so I know if four of these lights on one connector would work in our room. Many thanks Chris

Hi,

The cable tail at the bottom of each strip is 2m.

Can I divide 3x1 meter and connect that way or I can only get one 1m light out of the 3m?

Hi,

Unfortunately this strip will only do one length, what is left over would need to be disposed off.  To achieve what you are looking for you would need  starter kit and 2 x add ons.

Can the lights be split into two I.e the 3m length that comes as standard could I turn into two 1.5m lights?

Hi,

Unfortunately, the 3m LED strip is designed as a single unit and does not come with connectors to split it into separate sections.