Spot-Free, Fuss-Free Lighting
Seamless Adjustable White|24v|14w
Description
Seamless Adjustable White - no spotting - a continuous and even light along the whole length.
The latest manufacturing techniques mean a massive 840 LED's per metre for no spotting even without a diffuser. This is a colour temperature adjustable LED Strip which means that it can be adjusted between Warm 2700k and Cool 6000k to suit your mood - the transition is smooth an linear so you can easily find the white tone which matches your décor.
Important - remember that to make this work you will need the following additional items
-
A Dimming Interface
- A Power Supply
- 3 Core Cable
Power Supply
The maximum power consumption is 14w per metre. Choose a power supply with enough capacity - Powerpro75 is OK for up 5m and Powerpro150 will power 10m.
If you wish to to use long lengths then you should inject the power in the centre of the length rather than the end - this will avoid voltage drop and uneven light output.
5 Year Warranty
Please note: The strip image is for illustrative purposes. Only one colour temperature of white is possible at a time.
Specifications
Maximum recommended single length : 7m.
Max Lumens (on blended white) : 550/m
LED's Per Metre : 840
Colour : Variable from 2700k to 6000k
PCB Width : 10mm
Cut Points : 25mm
Operating Voltage : 24v
Backing Tape : 3M VHB
Add some profile
Inspiration for CCT Adjustable White Lighting
Follow and tag us at @LEDSpaceLighting
Product Q&A
-
do I need to connect it to a power source or is it battery operated/rechargeable?
Hi,
Unfortunatley we don't stock strips that are battery operated. All our strips have to be wired to PSU first then mains or plug. -
What is the W per M, it is not listed in the description. Thanks, Tom.
Hi, This strip is 14w per metre.
-
I know these are IP20 rated, but can they be used in a bathroom, (away from water), just in the bathroom environment ?
Hi, If these are not in zone 0, 1 or 2 they can be used at IP20
-
Are these dimmable?
Hi, All of our LED strips are dimmable, the dimming control method required would determine which parts are required to go with the strip.
-
can i use them in a sauna
Hi, No, we would not recommend using this strip in a sauna, this strip is IP20 rated so not suitable for this environment.
Our outdoor range of strips will all be suitable for use in a sauna. -
Is the "Line10 CCT Cable and Connector Pack" for £7.99 suitable to connect the 1m segments of this product, or do I need to solder?
Hi,
This connector pack can connect sections of this strip, however please note that if you order for example 4m of the strip, it will be supplies as 1 x4m strip, not 4 sections of 1 metre. -
How long are the kits? I need 6meters in total. 1 x 4 meter 2 x 1 meter In seemless no spot 6000k 10mm wide 24 volt Regards Mark
Hi ,
If you use the kit builder tool you can choose two kits at the lengths you need, the strip would be supplied as one length for you to cut to the sizes you require. -
Hi, What IP rating is this?
Good morning
Many thanks for your email.
The IP rating of this strip is IP20.
If we can be of any further assistance please do note hesitate to contact us.
Kind Regards
Lisa Jackson -
Hello, Can this be used with a PIR motion sensor which acts like a switch? If I get https://www.ledspace.co.uk/products/zigbee-interface-for-cct-led-strip to control the CCT colour I was hoping to place the PIR in a wardrobe so when the door opens it activates. Thanks
Hi, Yes you can link a PIR to this circuit to act as the switch.
-
Can this be used with a Zigbee controller?
Hi,
Yes this strip can be used with the CCT zigbee controller
https://www.ledspace.co.uk/products/zigbee-interface-for-cct-led-strip